Imaginations to High-Tech Solution

Inoweave Shaping Imaginations to High-Tech Solution

Inoweave an ODM (OwnDesign Manufacturing) Company established in 1987, with the focus on providing customized electronics solution to OEMs. At INOWEAVE, design, develop and manufcturer electronics according to specific requirement of each customer.

Equipped with well organized Development and Production department and efficient technical team serve valued customers. The company offers low cost solution through Dedicated Designed and Programmed Logic Controllers (DDPLC). Traditionally used PLC is very useful for small quantity. But when used in quantity DDPLC has advantageous edges like.

Prices much lower to PLC

Difficult to copy as non standard hardware.

Higher Level of user’s friendliness can be incorporated Comparison Of Plc And Ddplc.

Much complicated Algorithms can be easily achieved Price is about 60% or lower of PLC.

With PLC any application can be copied easily as hardware is a available as standard. In DDFLC both hardware and software are specially designed for OEM. Higher level of user’s friendliness can be achieved as DDPLC are specially designed. Keys and Display are designed as per operational convenience of each product.

DDPLC is made on OEM’s brand name hence gives better impact to overall product.

Replacement order comes to OEM and not to DDPLC manufacturer.

Replacement of card is comparativelyeasy as they are specially designed and fitted, with makes it cost effective Limitations.

Service

At however, design, develop and manufacture electronics instruments according to specific requirement of each customer.  

Product Panorama Girdle Polishing Robot

The machine is used for Polishing Girdle of the Diamond in Round Shape. The Electronics grain seeking Module enables the machine to polish diamonds with the right grain resulting in maximum production with minimum breakages.  

An embedded control for diamond Polishing Robot with 5 axis Micro Stepping control and

1 D.C. motor control.

2 High Speed Encoder feedback with A, B & Z sensing Load Cell interface for polishing diamond with Controlled Pressure.

Serial Interface with Computer for setting Polishing Parameters.

Camera Interface for Monitoring the cutting process of diamond LCD Display Interface.

Self Diagnostic Control to visualize error conditions in Process.

Highly accurate and sophisticated liners sensing mechanism for cutting Diamond with the accuracy in Microns.

Auto Blocking Controller

The machine is used for cutting Top and Bottom facets of Diamond. 

The Electronics grain seeking Module enables the machine to polish diamonds with the right grain resulting in maximum production with minimum breakages.

An embedded control for Diamond Polishing Robot with 3 axis Micro Stepping control and 1 A.C. motor control.

LCD Display Interface. Self Diagnostic Control to visualize error conditions in process.

Highly accurate and sophisticated linear sensing mechanism for cutting Diamond with the accuracy in Microns.

Lift Controller

This is a dedicated controller, and can deal with almost all inputs & output normally used in elevator control. It can handle systems like.

Doplex system.

Full / Down / Up collective 

Full / Down / Up collective

Auto / Manual door Single /Two speed / V V V F

16 Segment position indicator

14 x 10 & 8 x 10 Dot matrix display

72 inputs for floor switch, hall button, car button & different functional inputs.

56 outputs for call registration.

Dental X-Ray

Take care of all operations and functions of Dental X Ray.

3 No. 7 segment led displays.

8 relay o/p

Biomedical Instrument controller

Key Pad with 16 keys  All logic operations of dental X-rays are controlled by this unit supply voltage regulation Timing selection as per tooth type, film type and body type for controlled exposure.

Litho Tripsy

Titho Tripsy is an extra corporal shock wave Lithotripter. This machine disintegrates urinal and biliary system stones without pain and anesthesia. In this machine under water high voltage electric spark generates shock wave in the form of pressure pluses. 16 x 2 large Lcd Key Pad with 9 keys.

Biomedical Instrument controller for Kidney Stone
removal
Works under very heavy electrical noisy environment (very heavy capacitor discharge) Controls the KV of capacitor discharge for generating mechanical wave
Controls rate at which sparking takes place Controls number of sparks. Display total no of sparks given through this unit Controls pump an charge unit.

Air - Condition Controller

This Microcontroler base controller is meant to control temperature within set limit by switching “on” “of” Connected A.C. and keeping total running hours of all A.C. constant.

Application : 2 x 16 LCD display. 4 switch key pad. 20 Leds. 4 no. relays for alarm. 6 No. relay output for A.C. control. 6 No. input for compressor on. 6 no. input for A.C. overload. Input for considering fire.

Basic function of this unit is to maintain temperature within limit at the same time conservation of energy by optimizing usage of A.C. and keeping total running hours of all A.C. almost same. It has facility to bypass faulty A.C., Clearing falut, Defining No. of connected A.C. within 6, settable switching time between A.C.
With 2 x 16 LCD, one can visualized operating condition of each A.C., Actualand set temperature, total running hour of each A.C., alarm condition such as Fire, High temperature etc.

Autobell

This Microcontroler base instrument is design to control sequence of Bell or Buzzer operation. It can be programmed for full one week and repeat the sequence every week.